This design is so quick and easy, you can whip one (or lots) up in no time!

Four sizes are included -

5x7 hoop - completed size approx. 3" long
6x10 hoop (small) - completed size approx. 3.75" long
6x10 hoop (large) - completed size approx. 4.5" long
7x12 hoop - completed size approx. 5.25" long

No fancy key fob hardware required - just a 30mm (1 1/8") split ring and a snap fastener. 

Alternative, you can also use a 20mm D-ring and a smaller split ring.

The split ring (or D-ring) is not simply looped through the strap - the rounded flap is inserted through a slit before the ring is firmly secured by a press snap. The back of the design is shown below.

Two different versions are included too in each size - a wavy quilting stitch, and a simple line quilting.

And since this design is really quite simple, it is also conducive to doing multiples in one hooping (all the same fabric and thread colours). Four designs can been made in one hooping, except for 7x12 design which will fit five. I have included those files for each size as well - 16 files in total are included!

Easy to follow instructions (with photos) are included in PDF format.

Just a few notes about this design -
- Pinking shears have been used to cut around the edges and I highly recommend they are used on this design.
- Vinyl can be used in lieu of fabric - in which case no wadding/batting is required.
- This design looks best when matching thread is used in the bobbin AT LEAST FOR THE FINAL OUTLINE. The only part on the back that will be seen on the front once completed is the stitching around the "flap", so matching bobbin thread is highly recomended for a more professional look.

Formats included in download - PES, JEF, HUS, VIP, VP3, DST, XXX, ART and EXP

Designs to fit hoop size included - 5x7, 6x10 and 7x12

Hoop sizes vary by machine brand - please ensure the design fits your specific machine before purchasing, as no refunds can be offered if the designs do not fit your machine specific hoop
Click here for design size information